***** Geek Group Bucket Capacitor Question

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <dbanse-at-comcast-dot-net>

(the (*****) is just for personal mail sorting pourposes) :)
 
 
Here is my question....
 

What is the:

2 "5-Way" binding posts (these must be separate, not the kind that come as an
attached pair) panel-mount.

For the Geek group Bucket Cap??

can someone explain a little further?? Is is nuts, and bolts or something??
 
Here are the materials required:
 

Materials Required:
1 clean new 5 gallon bucket. This should be made from HDPE and MUST NOT BE
METAL! 

1 well sealing lid (preferably airtight) for the bucket

12 longneck beer bottles, preferably Corona brand, these must be washed and
clean

3 quarts of new synthetic motor oil

25' of 10AWG bare solid copper wire

1 rubber stopper, about .5" or so, no smaller than .25" 

2 "5-Way" binding posts (these must be separate, not the kind that come as an
attached pair) panel-mount.

2 of the 5"dia X 7" tall cardboard containers of Morton's Salt (or equivalent).
ANY salt will do, iodized or not, even Epsom salts would work.

1 glass pitcher with a good pour lip. You must be able to pour from this into a
bottle without spilling everything all over. It must be glass if you ever plan
on using it again, plastic is OK but getting the salt taste out is rather
difficult. 2 quarts is the best size.

 

What is the:

2 "5-Way" binding posts (these must be separate, not the kind that come as an
attached pair) panel-mount.

 

can someone explain a little further?? Is is nuts, and bolts or something??