microwave XMFR magnifier TC

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Tim J by way of Terry Fritz <twftesla-at-qwest-dot-net>" <digital_raven45-at-hotmail-dot-com>

Tim's coil specs:
~120 turn secondary (#16 "nylon coat" single strand wire)
~4 or so turns primary
~50 nF 45 kVDC homebuilt stack bucket cap....WORKS EXTREMELY WELL!!!
~4 seriesed (1400 watt draw Toshiba MOT's on 120V/60A service) for
8 - 9 kVAC-----!!whole setup under mineral oil!! ARC IN JACOBS LADDER CAN 
GROW TO 3ft!!!! BIG OUTPUT POWER!!! Not sure on milliamperage output but I'm 
guessing its above 400 mA!!!
I may add 2 more MOT's in series to get 13 kVAC...slightly insain current 
draw.
~3600 rpm 120v 8A RSG (6 electrodes)
~ 2, 15 kV 1000 pF rated disc caps with 25 mH RF chokes as protection 
curcuit
~ TESLA MAGNIFIER (2250 turn #27 mag wire with 12" dia toroid and smaller 4" 
dryer ducting charge collector at base of coil)
-----------------------------------------------------------------------
Haven't had time to play with the coil yet, but I'm hoping it works alright. 
Any suggestions out there??????