[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

SGTC and IDR-Tuning

To: tesla-at-pupman-dot-com
Subject: SGTC and IDR-Tuning
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 05 Feb 2002 08:47:27 -0700
Resent-Date: Tue, 5 Feb 2002 09:11:28 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <n226kC.A.hBB.uQAY8-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "David Sharpe by way of Terry Fritz <twftesla-at-qwest-dot-net>" <sccr4us-at-erols-dot-com>

All

Previous post was incorrect in regards to tuning.
You tap all primary turns into tank which sets system
to lowest frequency, with the IDR elevated a fair
distance (4"-5") axially away from primary.  Adjust
the IDR downward toward the primary.  As the
IDR plate approaches the primary, Lp will decrease
due to magnetic flux loading, which will increase the
tank frequency.  Adjust until primary and resonator
are tuned appropriately. Sorry for confusion... :^?

Regards
Dave Sharpe, TCBOR
Chesterfield, VA. USA

Prev by Date: Source for PFC caps
Next by Date: Re: Ideas for HV Wiring.
Prev by thread: Re: Source for PFC caps
Next by thread: SGTC and IDR-Tuning
Index(es):
- Date
- Thread