Re: Faraday Cage and 1/4 wavelength sized holes

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>

Yeah, but what frequency??  Is that the power across the entire frequency
range???  Or are you only sweeping a small portion of say the S-Band
frequencies.

Dan




 > We use a standard 2 inch mesh and can measure almost no radiation outside
 > the cage.
 >
 > At 10 feet the power is in the milliwatt range or less.
 >
 > Dr. Resonance
 >
 >
 >
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Tuesday, December 17, 2002 9:19 PM
 > Subject: Re: Faraday Cage and 1/4 wavelength sized holes
 >
 >
 >  > Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
 > <Mddeming-at-aol-dot-com>
 >  >
 >  >
 >  >
 >  > In a message dated 12/17/02 10:38:35 PM Eastern Standard Time,
 >  > tesla-at-pupman-dot-com writes:
 >  >
 >  >
 >  > >For a Faraday cage to work for some frequency, then the holes in that
 >  > >faraday cage must have a diameter less than the 1/4 wavelength of the
 >  > >frequency you are trying to block.
 >  >
 >
 >
 >
 >
 >