Re: Micro Tesla Coil design

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "John Richardson by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jprich-at-up-dot-net>

Dan,

I remember seeing a small high voltage power supply on e-bay.  I think that
in the description it was used for night vision goggles(!?), the output was
several Kvolts.  I didn't pay attention to the item number because at the
time this wasn't posted.

John Richardson

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, December 18, 2002 7:48 PM
Subject: Re: Micro Tesla Coil

 > Original poster: "Crow Leader by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<tesla-at-lists.symmetric-dot-net>
 >
 > You might be able to find a transformer from a linear power supply for a
 > HeNe laser. I use one probably rated 20 watts with an output of several
kV.
 > It was made by Inglot Electronics and ripped from a Uniphase lab laser.
 >
 > Old HeNe lasers in the rectangular metal boxes tend to be made like this,
 > before encapsulated switching power supplies became the standard.
 >
 > KEN
 >