Re: circuit board makers

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>

Welcome to the real world.  The prices quoted previously are dirt cheap
compared to what some prices cost.
For example, take a small 4 layer board with silkscreen for 2 pcs and price
will be about $500.00.

Dan




 > At the nonsense prices the places charge, it shoud be solid gold,
 > autographed and presented in a display case.
 >
 > BUT, it's not the case. They won't even cut stuff for you.
 >
 > KEN
 >
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Friday, December 06, 2002 4:51 PM
 > Subject: RE: circuit board makers
 >
 >
 >  > Original poster: "Black Moon by way of Terry Fritz
<twftesla-at-qwest-dot-net>"
 > <black_moons-at-hotmail-dot-com>
 >  >
 >  >
 >  >
 >  > >They seem to only make really "small" boards of a fixed size useless
to
 > me.
 >  > >The prices look pretty extreme as well. At something like $100 per two
 > board
 >  > >it better be some master craftman union people making that board by
hand
 >  > >with a chisel.
 >  >
 >  > at 50% a board it better be 4 layer, solid gold on your choice of color
 > and
 >  > pattren and meterial pcb (includeing solid steel for extra strength..
YES
 >  > you CAN get STEEL pcb, they use a small insulative layer beween the
steel
 >  > and traces and only use SMT stuff, iv seen a few small servo motors
with
 >  > PCB's printed on there metal
 >  >
 >  >
 >  >
 >  >
 >
 >
 >
 >
 >