OLTC update - winding the secondary

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi All,

For the OLTC effort, I have to wind like a mile and a half of wire on a
secondary.

I went and got like $10 worth of stuff for this;

http://hot-streamer-dot-com/temp/OLTC08-22-04.jpg

http://hot-streamer-dot-com/temp/OLTC08-22-05.jpg

http://hot-streamer-dot-com/temp/OLTC08-22-05.jpg

Seems to test out fine.  The drill easily stops if the torque incresses so
no borken wires.  The variac controls the speed of the drill just fine.  I
think this will work well.

Cheers,

	Terry