Re: homebrew charging reactor?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "S & J Young by way of Terry Fritz <twftesla-at-qwest-dot-net>" <youngs-at-konnections-dot-net>

Matthew,

It doesn't matter how they connect in series.  Mine connect core1 to core2
and outer2 to outer3 just because the connections were more convenient.
Yes, the primary and filament windings are left in place and have no effect.
Be sure they are open circuit.  I have also used 4 MOTs in series with good
results.
--Steve Young

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, August 18, 2002 7:54 PM
Subject: Re: homebrew charging reactor?


> Original poster: "Matthew Smith by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <matt-at-kbc-dot-net.au>
>
> Steve
>
> Just to make sure I've got the right picture - you have three MOTs
> mounted on insulating standoffs in air - core of one connected to outer
> secondary tap of next (x2)?
>
> Do you leave the primaries and filament windings in place?
>
> Cheers
>
> Matthew Smith
>
>