Re: OLTC update

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Finn Hammer by way of Terry Fritz <twftesla-at-qwest-dot-net>" <f-h-at-c.dk>

  Soldering IGBT
> leads to 0.025 copper plate takes a big soldering iron on the "ludicrous"
> setting (I used two ;-)).  Took about 1/2 second of "heat" ;-))
> 
> Cheers,
> 
>         Terry


Hi Terry!

Next time, you should try to slot the copper plate like this:

http://www.wimshurst-dot-com/ledninger.jpg

It shows 4 runs of RG 219 (you know, the antenna stuff, debraided)
soldered to 0.1" copper plate.


Cheers, Finn Hammer