[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: OLTC - Split core inductors

To: tesla-at-pupman-dot-com
Subject: Re: OLTC - Split core inductors
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sat, 17 Aug 2002 17:20:34 -0600
In-Reply-To: <003b01c24639$8df1a7e0$02a8a8c0-at-jimlux>
References: <4.1.20020816231031.00a7e778-at-pop.dnvr.qwest-dot-net><4.1.20020817122959.00a24540-at-pop.dnvr.qwest-dot-net>
Resent-Date: Sat, 17 Aug 2002 17:20:56 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <rCNpaC.A.iYE.WptX9-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

At 03:00 PM 8/17/2002 -0700, you wrote:
>The link was in a post in the archives (<grin>)..
>

Hi Jim,

http://www.alphacore-dot-com/inductor.htm

Wow!  They have all the cool stuff we need.  I recognize most if it since
it is used at work.

From the charts, it sounds like they "could" make the air inductor but it
would be large and expensive.

However, check out these cores!

http://www.alphacore-dot-com/stcores.htm

A big 1200 watt one is only $21.  Just a saw cut away from being just like
my variac core.

Online ordering too!!

Looks like a great place to get this stuff from!!!

Cheers,

	Terry

References:
- Re: OLTC - Split core inductors
  - From: "Tesla list" <tesla-at-pupman-dot-com>
- Re: OLTC - Split core inductors
  - From: "Tesla list" <tesla-at-pupman-dot-com>

Prev by Date: RE: New on the list -HV probe Q's
Next by Date: Re: Pole Pig Construction
Prev by thread: Re: OLTC - Split core inductors
Next by thread: Re: OLTC - Split core inductors
Index(es):
- Date
- Thread