[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: copper vs. aluminum

To: tesla-at-pupman-dot-com
Subject: Re: copper vs. aluminum
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 14 Aug 2002 18:17:29 -0600
Resent-Date: Wed, 14 Aug 2002 18:50:36 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <bHZbYC.A.bKD.ZrvW9-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Fucian-at-aol-dot-com>

In a message dated 8/14/02 8:28:41 AM Eastern Daylight Time, tesla-at-pupman-dot-com 
writes:

<< -another good reason not to use aluminium electrodes with alkalis in "salt
 water" capacitors. >>

Do you know of a cheap source of copper foil?Ithink cost is the main issue 
dictating the material use for capacitors.Aluminum is cheap and easy to get.

Matt

Prev by Date: winding jig
Next by Date: Re: Toploads was: RE: Neighbors and noise
Prev by thread: Re: copper vs. aluminum
Next by thread: OLTC page
Index(es):
- Date
- Thread