[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Electrical Oscillators in Space

To: tesla-at-pupman-dot-com
Subject: Re: Electrical Oscillators in Space
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Thu, 08 Aug 2002 08:06:11 -0600
Resent-Date: Thu, 8 Aug 2002 08:06:55 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <-fXTyD.A.uQG.1rnU9-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "boris petkovic by way of Terry Fritz <twftesla-at-qwest-dot-net>" <petkovic7-at-yahoo-dot-com>


> 
> The VDG machine is usually enclosed in a high
> pressure gas, not
> vacuum. Only the interior of the parts where the
> beams travel
> is at high vacuum.
> 
---
Yes.The mentioned machine was enclosed under 50 bars
+.8 cm diameter tube with thick wall  ,and some other
parts were at high vacuum.

regards,
Boris

Prev by Date: Re: Square rotor disk on SRG
Next by Date: Re: Electrical Oscillators in Space
Prev by thread: Re: Electrical Oscillators in Space
Next by thread: Re: Electrical Oscillators in Space
Index(es):
- Date
- Thread