OLTC update

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi All,

I got the IGBT's mounted to a heat sink and the primary coil made up.

http://hot-streamer-dot-com/temp/P8050014.jpg

http://hot-streamer-dot-com/temp/P8050015.jpg

http://hot-streamer-dot-com/temp/P8060016.jpg

http://hot-streamer-dot-com/temp/P8060019.jpg

The primary is three parallel 1/2 inch copper pipes 14 inches in diamater,
spaced 2.5 inches apart (all center to center).

Still needs copper iny and outy plates, caps, and the drive electronics
before it really starts to look like something cool.  But it's getting
there ;-)

I hope the milling machine was not cheating :-))  They don't make things
better, they just make things faster ;-))

Cheers,

	Terry