Re: Schematic Capture

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Matthew Smith by way of Terry Fritz <twftesla-at-qwest-dot-net>" <matt-at-kbc-dot-net.au>

Hi Steve / All

Just gotten around to taking a look at this - always willing to look at 
alternative softwares.  Sadly, no Linux version :-(  So, I'll just have 
to stick to Eagle...

I think that CAD/CAM produced boards may well be the solution to 
MMC/diode string construction.  Got to be able to use a CNC drill 'cause 
I wouldn't want to be drilling all of those holes by hand!

Cheers

Matthew Smith

Tesla list wrote:

> Original poster: "S & J Young by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<youngs-at-konnections-dot-net>
> 
> Coilers,
> 
> Do any of you have experience with McCad's free Electronic Design Software,
> EDS-lite?  It has schematic capture, PC board layout, etc.  It is about a 5
> mbyte download.  Just wondering your opinions on the schematic capture part
> of it.  See info about it at http://www.mccad-dot-com/
> 
> 
> Thanks,

> --Steve Young