[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: flat coil ?



Original poster: "Jim Lux by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jimlux-at-earthlink-dot-net>


> Original poster: "Chris Swinson by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <exxos-at-cps-games.co.uk>
>
>> > Congrats on getting the coil wound! If you get the chance, it would be
> good
> > for us to know the bare
> > wire diameter. You mentioned 1.6mm (is that the bare wire diameter?).
> Also,
>
> Thats a good question! It just says 1.6mm on the reel.  I tried to mesure
> with a ruler and it looks more like 1.8 though you can't trust that. AFAIK
> its 1.6mm dia.

Perhaps the copper diameter is 1.6mm and there is a 0.1 mm thick insulation
layer, making the total OD 1.8mm?