[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Tuning and such.



Original poster: "Garret Sawtell by way of Terry Fritz <twftesla-at-qwest-dot-net>" <sawtellg-at-dteenergy-dot-com>

Thank you.  My calculator and I feel much better now.  How about you, Vince?

Tesla list wrote:

> Original poster: "Barton B. Anderson by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <tesla123-at-pacbell-dot-net>
>
> Hi Garret,
>
> You might want to try my JavaTC Designer at:
> http://www.classictesla-dot-com/java/javatc.html
>
> or John Couture's JHCTES at:
> http://www.miramar.sdccd.cc.ca.us/faculty/jcouture/tesla/jhctes33.asp
>
> For formula's, check out Matt Behrend's site at:
> http://home.earthlink-dot-net/~electronxlc/formulas.html
>
> Take care,
> Bart
>
> Tesla list wrote:
>
> > Original poster: "Garret Sawtell by way of Terry Fritz
> <twftesla-at-qwest-dot-net>" <sawtellg-at-dteenergy-dot-com>
> >
> > Now there's some real helpful advice.  I personally don't have a calculator
> > that will find the formulae for
> > me.  Perhaps you could share your secrets with the rest of us who are so
> > hopelessly ignorant.
> >
> > Tesla list wrote:
> >
> > > Original poster: "Neil Richardson by way of Terry Fritz
> > <twftesla-at-qwest-dot-net>" <neil-at-opticalrealities-dot-com>
> > >
> > > for tuning i'd get out a calculator, find the formulae, and look -at- the
> specs
> > > of your coil.
> > >
> > > -----Original Message-----
> > > From: Tesla list [mailto:tesla-at-pupman-dot-com]
> > > Sent: 20 April 2002 02:52
> > > To: tesla-at-pupman-dot-com
> > > Subject: Tuning and such.
> > >
> > > Original poster: "Vince D'Amore by way of Terry Fritz
<twftesla-at-qwest-dot-net>"
> > > <tesla-at-teslafx-dot-com>
> > >
> > > Hello People,
> > >
> > > Well I am tinkering with my new coil now and getting it in tune the
best I
> > > can.
> > > Unfortunately I do not have any signal generator or scope so I am
adjusting
> > > gap and tap for the best performance. It is trial and error at this
stage.
> > > I am getting 24inch streamers from my coil. I am planning on posting the
> > > images of
> > > the coil and streamers soon. I'm also working on a webpage and will post
> > > them there. Thank you list and all the people who gave me advice in the
> > > past. I'm sure I will have more questions in the future.
> > >
> > > Vince