[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Isolate electrode?



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jim-at-jlproduction-dot-com>

Hi Ralph,
I couldn’t get any of the pictures to work. I am curious to see what
they look like however.
Jim

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com] 
Sent: Wednesday, April 03, 2002 1:58 AM
To: tesla-at-pupman-dot-com
Subject: Re: Isolate electrode?

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<Parpp807-at-aol-dot-com>

In a message dated 4/2/02 6:14:27 PM Central Standard Time,
tesla-at-pupman-dot-com 
writes:

> In other words keep the electrode
>  from contacting anything else but its input and output connections?
Does
>  that make sense?

Jim,
I would agree with that. The brass
will make a good heat sink but I try to keep the electrodes isolated. 
You can see pictures of a few of my static gaps at "Ralph's Coil"

http://hot-streamer-dot-com/temp/RalphsCoil/

Cheers,
Ralh Zekelman