Re: Dual NST question

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jason by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jasonp-at-btinternet-dot-com>

Hi Vince,

Theoretically there should be no problems, as allison and frnceformer are
good makes. The shunting on one will stop the backflow into theother, so
there should be very few problems. I have used 10/85s and 10/35s together
without problems, so i think it would be ok.

Regards,
Jason
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, September 26, 2001 3:15 PM
Subject: Dual NST question


> Original poster: "Vince D'Amore by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <vincedamore-at-earthlink-dot-net>
>
> Hello People
>
>
> I have two NST's I plan on using to power my coil They are both
> 12/30's. However they are of different manufactures. One is a
> Alanson and the other is a Franceformer.
> My question is can they be used together?
> Would there be any drawbacks?
>
>
> Vince
>
>
>