RE: Pacemaker. Flukes, and rf effects

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Ted Rosenberg by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Ted.Rosenberg-at-radioshack-dot-com>

That is so cool.
I would love to build and have a much larger coil in the haunted house.
However, the rooms are typically no larger than 12x15 give or take. With a
220V coil or a multi-NST, I might have wandering arcs through walls and then
we could discuss the electric chair some more. Or worse, nails in wood which
are the ultimate in producing deep carbon tracks accompanied by flame and
smoke.

we post clear Pacemaker signage. But the 900mHz security staff radios get
wiped from time to time.

So, I am pretty much restricted to 3-4 footer to ground.

Safety First

Ted

=========================================
Subject: RE: Pacemaker. Flukes, and rf effects 


Original poster: "Vanderputten, Gary by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <gvp-at-pvaintl-dot-com>

I have recently run my 900w 15" coil as part of a production of the show
'Frankenstein' . The show was a success and the set was the star with many
ladders and the coil, which worked fabulously - 12-15 arcs to my RF ground. 

Signs warned patrons of the potential danger to vital electronic medical
equipment. I had two patrons with pacemakers. I had them sit at 30 feet and
the other insisted that he wasn't concerned and sat at 15 feet. Neither
reported feeling anything.

Other electronic devices worked within 3 feet without adverse effects
(camcorders, digital cameras,  my Palm (yikes!). The lighting dimmer board
froze at 15 feet, fine at 25. However, the latest Fluke multi-meter could
not do a primary current or voltage calculation (regardless of distance)
without going all over the place when used on the NSTs and ultimately fried.
Very grateful for their guarantee. My cheap digital worked fine. 

Gary

 -----Original Message-----
From: 	Tesla list [mailto:tesla-at-pupman-dot-com] 
Sent:	Tuesday, September 25, 2001 10:16 AM
To:	tesla-at-pupman-dot-com
Subject:	RE: how do i build one

Original poster: "Ted Rosenberg by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<Ted.Rosenberg-at-radioshack-dot-com>

Ricardo:
Before we can reply with solid info, it would help us to know three things:
1. how much is in your budget to build a Tesla Coil?
2. how much time are you allowing to do the job?
3. do you have access to and know how to use the many tools you'll need?

There are many good web pages to read first.
One is the pupman home page at http://www.pupman-dot-com
It has excellent info on SAFETY and overall info on the subject.
It can also link you to other pages with more detail.
But, just as if someone said to be "I want to build a house." without any
further ino, I would start by asking many, many questions and narrow it down
a bunch.

Safety First
Ted

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Monday, September 24, 2001 5:36 PM
To: tesla-at-pupman-dot-com
Subject: how do i build one


Original poster: "ricardo castro by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<vaca99_99-at-yahoo-dot-com>

could you tell how to build one 
because i have a sciense fair 
bye

__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo!
Messenger. http://im.yahoo-dot-com