Re: Coil Question

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Dave,

It does not make any difference.  We discussed this awhile back but no one
could find any reason why one winding direction would be better or worse.
This is especially true since the voltages on the primary and secondary are
90 degrees out of phase anyway. 

Cheers,

	Terry


At 11:11 AM 9/20/2001 -0500, you wrote:
>I am getting ready to wind my secondary and I have a question I hope you can
>help answer. Does the secondary need to be wound in the same direction as
>the primary (clockwise verses counter clock wise)? If so how would you
>determine the direction of a flat primary (is the first winding on the
>inside or outside)? Probably a moot point but I am interested in seeing your
>opinions.
>
>Dave
>
>=========================================
>Dave Kyle
>Austin, TX USA
>Email: dave-at-kyleusa-dot-com
>