[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Looking for run caps, urgent



Original poster: "Ted Rosenberg by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Ted.Rosenberg-at-radioshack-dot-com>

Jonathan:
There seems to be some weirdness here.

Terry...you might want to jump in.
I ran the formula using my 15/60 as a model. The answer was 165µF.
But in an earlier e-note you suggested that only 100µF would be enough.

Now here's Jonathan with a figure that meshes with my 165, ie 165 * 2
<because he's using a 120mA figure>= 330.
So, what's the REAL story?????
Inquiring minds want to know  :))


Safety First
Ted

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Monday, October 22, 2001 12:33 PM
To: tesla-at-pupman-dot-com
Subject: Re: Looking for run caps, urgent


Original poster: "Jonathan Peakall by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <jpeakall-at-mcn-dot-org>

Frank and other whow wondered,

I need 332uf because I have a 15/120 NST, and that's what the java TC
designer prog. says I need. I sure hope that's right, as it looks like
getting these caps is gonna be spendy.

Jonathan Peakall
----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, October 22, 2001 12:07 AM
Subject: Re: Looking for run caps, urgent


> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<PsychoticMinds1-at-aol-dot-com>
>
>
>
>         What do u need such a high uf of run caps for?
>
>
>
> Frank
>
>
>