Re: Control panels safety questions

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Metlicka Marc by way of Terry Fritz <twftesla-at-qwest-dot-net>" <mystuffs-at-orwell-dot-net>



> Hi, I know this is asking a lot, but could you, or someone else link me, or
> create a schematic showing this setup? It's kinda confusing to me :-\
Also is
> this for the 120V setup? or is it using a 12 / 24 V setup?
> Thanks..
> 

http://www.fortunecity-dot-com/meltingpot/syria/1210/id34.htm

the schematic at the bottom of the page shows a latching circuit, you
can see that the hot for the relays closing coil goes through a normally
closed contact of the other relay. when the off push button energizes
and closes the latching relay, it opens the coil of the work relay, then
it drops out.
I tried to explain it well on this page, hope it helps.
Marc M.



> ---------------------------------------
> Jonathon Reinhart
> hot-streamer-dot-com/jonathon