[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

MOT's MOC's on small coil

To: tesla-at-pupman-dot-com
Subject: MOT's MOC's on small coil
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 17 Oct 2001 17:05:14 -0600
Resent-Date: Wed, 17 Oct 2001 17:11:54 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <AritI.A.DsD.6Ahz7-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Shaun R. Phelps by way of Terry Fritz <twftesla-at-qwest-dot-net>" <shaun-at-visorloop-dot-com>

Hi all,

I am considering building a smaller coil with a microwave oven transformer
and a microwave oven cap(s).  But, I am not sure of the tank cap
configuration I would need.  I have quite a few 0.7uF 2100VAC MOC's, but am
unsure as to how much current and voltage (assume ~2KVAC) is coming from the
MOT, which I would need to approximate the size of the cap needed.  Any
approximations?  Is this a waste of time?

Thanks!

Shaun.

Prev by Date: Geek Group MMC, notice for all customers.
Next by Date: Slight incongruity with Building the Trigger Gap PDF
Prev by thread: Geek Group MMC, notice for all customers.
Next by thread: Re: MOT's MOC's on small coil
Index(es):
- Date
- Thread