[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: LTR question
Original poster: "Ted Rosenberg by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Ted.Rosenberg-at-radioshack-dot-com>
Robert:
It seems that the tank value for your NST combo is the same as was mine for
a single 15/60. And I was cautioned to make the new cap LTR (.028) by
several folks when I started the tgap.
My guess is that you should too.
Others can probably give you the techy reasons.
Good luck in the construction. It's hard to make a mistake.
Safety First
Ted
-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Tuesday, October 16, 2001 9:01 AM
To: tesla-at-pupman-dot-com
Subject: LTR question
Original poster: "Robert by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<obiwan1186-at-sunflower-dot-com>
I just read the much anticipated plans for marc's TSG and i am
interested in building one to run with my 4.5" coil, but i am not
running at LTR. My power supply is a bank of 5 9/30's for a 9/150 total
power input. my question is, to calculate the LTR value of capacitance,
do I use the individual trannie's values or the whole bank. right now my
mmc cap value is about 0.01uf. can i run the TSG with just that or do i
have to upgrade?