[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Copper tube for Primary
Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Parpp807-at-aol-dot-com>
In a message dated 10/2/01 2:15:21 PM Central Daylight Time, tesla-at-pupman-dot-com
writes:
<< I got a 50 ft spool of 3/8" tubing from Home Depot. It was very difficult
to bend into smooth arcs (my fingers are still numb) but it worked.
JJ >>
Jeff,
you have to get soft refrigeraton tubing which is much easier to bend than
the hard stuff.
Use the tubing benders or a large round can.
Ralph Zekelman