Re: intro + Australian coilers+caps+transformers etc

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Hollmike-at-aol-dot-com>

Hi Greg, 
  I believe LDPE is preferable, but both will work fine.  You probably won't
notice any difference in performance.    
  My company had projects in electrostatic mineral separations, so I managed to
get one of these.   The big red box is essentially a high voltage transformer,
I would guess.  I had one a while back.  It should also have a large tube
rectifier in it.  Mine had one made by Eimco and had a PIV of 100kV.  The
transformer should have an output of 50 - 70kV.   
Mike