Re: Sources for Free Magnet Wire?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Ed Phillips by way of Terry Fritz <twftesla-at-qwest-dot-net>" <evp-at-pacbell-dot-net>

Tesla list wrote:
> 
> Original poster: "Bob Bozarth by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<jbdetails-at-prodigy-dot-net>
> 
>     I did...Tore it all up trying with the model I had. I couldn't get the
> two pieces apart that "caged" in the wire on the armature. The outside wire
> was so stiff ( looked like about 16ga or more) that most of the enamel
> cracked off. I had much better luck with an AC motor.
> 
> Bob Bozarth
> Experimenter

	Why not just mow lawns for a buck each and use the earned money to buy
"good wire"?  Unless you enjoy the fun of scrounging, you'll come up
with a better coil quicker that way.

Ed