[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Question for John about the 5-125B and the 810

To: tesla-at-pupman-dot-com
Subject: Re: Question for John about the 5-125B and the 810
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 31 Oct 2001 19:27:37 -0700
Resent-Date: Wed, 31 Oct 2001 19:42:27 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <k913v.A.PjB.RaL47-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <FutureT-at-aol-dot-com>


Rick,

Just one 810 will work fine for a tube coil.  I'm not really familiar
with the 5-125B tube, but it sounds like a pentode, and may be
similar to the 4-125A tetrode.  Pentodes work, but I usually
avoid them.  The capacitors can be mica, polypropylene, 
polyethylene, MMC's, etc. 

Cheers,
John

Prev by Date: RE: Building the Primary Coil
Next by Date: Marcs electrodes
Prev by thread: Question for John about the 5-125B and the 810
Next by thread: Re: Question for John about the 5-125B and the 810
Index(es):
- Date
- Thread