Re: Sources for Free Magnet Wire?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Bob Bozarth by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jbdetails-at-prodigy-dot-net>

    I did...Tore it all up trying with the model I had. I couldn't get the
two pieces apart that "caged" in the wire on the armature. The outside wire
was so stiff ( looked like about 16ga or more) that most of the enamel
cracked off. I had much better luck with an AC motor.

Bob Bozarth
Experimenter