Re: Some sucess, w/ a flourecent bulb

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <FutureT-at-aol-dot-com>

In a message dated 11/26/01 11:03:01 PM Eastern Standard Time, 
tesla-at-pupman-dot-com writes:

Paul,

You can easily tighten the coupling by lowering the bottom of the
secondary *beneath* the primary by a couple inches.  Or raise
the primary above the bottom of the secondary by an inch or two
if that's easier on your coil.

John Freau

> or the primary isn't coupled tightly enough to the 2ndary
>  there is quite a bit of clearence since the inner of the primary is 8.5 
> inches
>  and the outer of the secondary is 2.5 so thats 3 inchs, the bottom turn of 
> the
>  secondary is even with the pancake primary
>   
>  Paul J Jenkins
>