[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: rotary gaps

To: tesla-at-pupman-dot-com
Subject: Re: rotary gaps
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Mon, 26 Nov 2001 21:43:30 -0700
In-Reply-To: <20011127043447.XTM15547.mtiwmhc25.worldnet.att-dot-net-at-webmail.worldnet.att-dot-net>
Resent-Date: Mon, 26 Nov 2001 21:44:59 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <n2WTaD.A.4uC.CpxA8-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi,

Here are plans about how to convert a motor for sync rotary gap use:

http://hot-streamer-dot-com/TeslaCoils/Misc/sync_motor.txt
http://hot-streamer-dot-com/TeslaCoils/Misc/syncmot.zip

Cheers,

        Terry




At 04:34 AM 11/27/2001 +0000, you wrote:
>looking for anything i can find {pages plans 
>links,drawings} on rotary gaps i am using two 15000 30ma 
>nst,s two tcbor 6in static gaps primary  14 turns 1/4 
>copper fla.24x6 sec wound with #22 thanks
>

Prev by Date: RE: Attaching Toroid to Secondary
Next by Date: RE: Pink Plasma
Prev by thread: rotary gaps
Next by thread: Re: rotary gaps
Index(es):
- Date
- Thread