Re: Fustrated medium coiler

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "pjj by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jjenkins-at-satx.rr-dot-com>

2 1/2 two and a half inches think i have tried to tune it honestly, to the
best of my ability i tried all the tuns on the primary coil, so i shrunk the
primary gaps think humm maye there isn't enough emf being built up sitll no
go, then i thought not enough cap so i wnat over kill with a micro wave over
Cap measured at .97uf

that why i ask for help

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, November 26, 2001 11:34 AM
Subject: Re: Fustrated medium coiler


> Original poster: "Jason Petrou by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<jasonp-at-btinternet-dot-com>
>
> (name?)
>
> You have obviously not even attempted to tune your coil at all... I am
also
> not sure what you mean by your secondary dimensions. Do you mean that the
> secondary is 1/2 inch thisc and 24 inches long? That would mean a turns
> ratio of 48:1. This is far too high - a 1/2 inch tube means that you would
> need a winding about 2" long!!!
>
> You need to build a new secondary then re-tune the coil.
>
> Best regards,
> Jason
> ----- Original Message -----
> From: "Tesla list" <tesla-at-pupman-dot-com>
> To: <tesla-at-pupman-dot-com>
> Sent: Monday, November 26, 2001 3:15 PM
> Subject: Fustrated medium coiler
>
>
> > Original poster: "pjj by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <jjenkins-at-satx.rr-dot-com>
> >
> > Alright i know i have a lot of weak links in my tank
> >
> > 1 - i'm using 2 mot's 2ndaries are in a series primiaries in parrell
> (blows
> > breakers easy)
> >
> > My primary was 1/2 apart i shrunk it to 1/4 inch distance
> >
> > i tried my SW cap which is small (.005 uf yes .00) i also tried to a .91
> uf
> > micro wave cap (makes the spark gap LOUD)
> >
> > spark gap is just a single gap till it fires (hard with a MOT)
> >
> > 2ndary is 22ga. wound tight on 2 1/2" PVC for 24 inches (is that to
long?)
> >
> > With this thing i get nothing no corona no break out nothing
> >
> > any advise is appriciated
> >
> >
> >
>
>
>