RE: Coating secondary (fwd)

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Tesla List Moderator <mod1-at-poodle.pupman-dot-com>



---------- Forwarded message ----------
Date: Wed, 7 Nov 2001 23:13:39 -0500
From: Alex Madsen <alexmadsen-at-yahoo-dot-com>
To: Tesla list <tesla-at-pupman-dot-com>
Subject: RE: Coating secondary

I am a big fan of pour-on (envirotex light) (epoxy in large quantities for
coating coils) It levees a thick rock hard coat in one night.
Alex Madsen
www.geocities-dot-com/alexmadsen


-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Wednesday, November 07, 2001 10:03 AM
To: tesla-at-pupman-dot-com
Subject: Re: Coating secondary


Original poster: "Bob Bozarth by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<jbdetails-at-prodigy-dot-net>

    I used polyurethane, with the coil on a winding device I built that
resembles a lath. It took about 30 minutes for the first coat to get dry
enough to touch. In one night I had a layer about 1/16" thick or more. I had
a 300 watt halogen pointed at it about 24" away, any closer and I ended up
with bubbles. It was about 45º F in my garage.

    Bob Bozarth
    Experimenter



_________________________________________________________
Do You Yahoo!?
Get your free -at-yahoo-dot-com address at http://mail.yahoo-dot-com