[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

AAAAAAAH! (tsg problems)



Original poster: "Robert by way of Terry Fritz <twftesla-at-qwest-dot-net>" <obiwan1186-at-sunflower-dot-com>

Ok, i tried just hooking up the lutron fandial, the discrete components, 
and the HEI coil drawing arcs to a dedicated ground from the output of 
the HEI coil. (metlicka gap) and my perfboard started on fire and i 
boiled water on the resistors. I'm sure i hooked everything up properly 
but i didn't use a cooling fan hooked up in series with the other 
components. is that my problem or did I just screw up big time? thanks
Robert