[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: spark gap muffler?



Original poster: "acmnovak by way of Terry Fritz <twftesla-at-qwest-dot-net>" <acmnovak-at-email.msn-dot-com>

I agree, the sparkgap is the least of your noise problems. Even solid state
coils can scream like a banshee... :-o
The only way to produce a silent coil would be to run a solid state driven
flyback in a vacuum environment. But even then, you'll get some ugly high
pitch whines.

-Mike Novak

----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, May 24, 2001 2:08 PM
Subject: RE: spark gap muffler?


> Original poster: "Lau, Gary by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<Gary.Lau-at-compaq-dot-com>
>
> For a properly performing medium to large size coil, the noise produced
> by the streamers is louder than the gap.  So unless you're shooting for
> a streamerless coil like Mr. Tesla, the overall coil will be loud no
> matter what you do the gap.  Or you could go to a tube or solid state
> coil for a truly (near)-silent coil.
>
> Gary Lau
> MA, USA
>
> -----Original Message-----
> From: Tesla list [mailto:tesla-at-pupman-dot-com]
> Sent: Thursday, May 24, 2001 10:01 AM
> To: tesla-at-pupman-dot-com
> Subject: spark gap muffler?
>
>
> Original poster: "Bill Vanyo by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <vanyo-at-echoes-dot-net>
>
> Has anyone invented such a thing?
>
> Basically, I'm wondering if there's any way to make a silent or somewhat
> quiet spark gap for a medium to high power coil.  I'm currently using a
> static gap, but would consider other designs.
>
> - Bill V.
>
>
>
>