[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Original poster: "S & J Young by way of Terry Fritz <twftesla-at-uswest-dot-net>" <youngs-at-konnections-dot-net>
I vote for the 30 inch secondary for less risk of strikes to the primary.
Or, try about 1600 turns of the #24 to add a few more inches of winding
Please use a real name on this list (I assume A123X is not what your parents
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
Sent: Wednesday, May 09, 2001 8:52 PM
> Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>"
> Would it be better to make a 6" by 30" secondary with 1200 turns of
> wire or a 6" by 24" secondary with 1200 turns of 24gauge. I'm leaning
> the 24gauge, since the cost for a 10pound spool is the same but I'd have
> more feet left over with the 24gauge. I'm also sick of NST's dying, whats
> best way of going about getting a potential transformer?