[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

*To*: tesla-at-pupman-dot-com*Subject*: RE: E-Tesla6, was RE: Sphere/Toroid Comparison Chart*From*: "Tesla list" <tesla-at-pupman-dot-com>*Date*: Wed, 09 May 2001 18:44:36 -0600*Resent-Date*: Wed, 9 May 2001 18:46:14 -0600*Resent-From*: tesla-at-pupman-dot-com*Resent-Message-ID*: <CVbQ9.A.OqG.8Se-6-at-poodle>*Resent-Sender*: tesla-request-at-pupman-dot-com

Original poster: "John H. Couture by way of Terry Fritz <twftesla-at-uswest-dot-net>" <couturejh-at-worldnet.att-dot-net> Peter - The JHCTES Ver 3.1 and E-Tesla6 programs are supplements to one another. The JHCTES program uses the Wheeler program and the secondary turns is an input. Another input is the secondary terminal capacitance. The E-Tesla6 program can help you determine this parameter by giving you a resonant frequency. You then adjust the JHCTES secondary capacitance to give you this frequency in the outputs. All of the inputs and outputs will then be in tune. John Couture ---------------------------- -----Original Message----- From: Tesla list [mailto:tesla-at-pupman-dot-com] Sent: Tuesday, May 08, 2001 12:26 PM To: tesla-at-pupman-dot-com Subject: E-Tesla6, was RE: Sphere/Toroid Comparison Chart Original poster: "Peter Lawrence by way of Terry Fritz <twftesla-at-uswest-dot-net>" <Peter.Lawrence-at-Sun-dot-com> Terry, I've been looking at E-Tesla6 and noticed that it requires as input the "Measured Secondary Inductance". I was sort of expecting to have to enter the "number of turns" somewhere, something more like ACMI which takes as input the dimensions of the coil and wire and then calculates inductance. If I am going to use E-Tesla6 to estimate the Fres of a coil _before_ I build it do I use Wheeler: "R**2 * N**2 / (9*R + 10*H)" formula for inductance? How accurate is that anyway, what about Lundin's formula? I'm in the process of building 3 coils (approx 4x12, 3.5x15, 3x18) each hopefully with identical Fres (with the same 2x8 toroid), so I'ld like to use E-Tesla6 to find the exact winding length and number of turns to get identical Fres. Then I'll use ACMI to adjust the height of each one to get exactly the same K (of 1/7) for each. Then see if there is any difference in operation. Not that I expect there to be any, this is just for fun, after all its a hobby(!). -Peter Lawrence. >Original poster: "Terry Fritz" <twftesla-at-uswest-dot-net> > >Hi John, > >"E-Tesla6" a program I wrote that was vastly improved by others, can find >the resonant frequency of a one or two torroid (or sphere) Tesla coil >secondary system within a percent or two. It does all the nasty >electrostatic field calculations and even has elements of Paul's TSSP >project added. It is freely available at: > >http://hot-streamer-dot-com/TeslaCoils/Programs/E-Tesla6.zip > >A web page with info is at: > >http://hot-streamer-dot-com/andrewb/ > >It is very useful for determining the resonant frequency of a secondary >coil and top terminal before they are built. Everyone seems to like it a >lot and it seems to work very well. I ton of effort went into the darn >thing ;-)) > >Cheers, > > Terry >

- Prev by Date:
**Re: Brass that isn't brass** - Next by Date:
**RE: Sphere/Toroid Comparison Chart** - Prev by thread:
**Re: E-Tesla6, was RE: Sphere/Toroid Comparison Chart** - Next by thread:
**input help** - Index(es):