Re: Line filter / RF choke

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jason Petrou by way of Terry Fritz <twftesla-at-uswest-dot-net>" <jasonp-at-btinternet-dot-com>

Tery,
I read your paper on NST protection and want to know where to get that
little doorknob cap that you used (was it 2.7pF at 30KV?). The nearest thing
to it that I can find is a 16pF cap at 45KV but it will set me back about
£80! where can I get these from??

Regards,
Jason
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, May 05, 2001 7:51 PM
Subject: Re: Line filter / RF choke


> Original poster: "Terry Fritz" <twftesla-at-uswest-dot-net>
>
> Hi Jason,
>
> Here are some links to mine:
>
> http://hot-streamer-dot-com/TeslaCoils/Misc/NSTFilt.jpg
>
> http://hot-streamer-dot-com/TeslaCoils/MyCoils/SmallCoil/SmallCoil.htm
>
> http://hot-streamer-dot-com/TeslaCoils/MyCoils/SmallCoil/small_protection.jpg
>
> Cheers,
>
>         Terry
>
> At 07:31 PM 5/5/2001 +0100, you wrote:
> >
> > Hi all,
> > How do I build my own line filter / RF choke to go between my tranny and
the
> > rest of the cicuit? I am using a 9/30 NST (weak-ish i know) and i want
it to
> > last as long as possible without any problems.
> >
> > Thanks,
> >
> > Jason
>
>
>
>
>