[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

rotary pics

To: tesla-at-pupman-dot-com
Subject: rotary pics
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 27 Feb 2001 19:13:26 -0700
Resent-Date: Tue, 27 Feb 2001 19:13:33 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <hl59l.A.slG.J7Fn6-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "bob golding by way of Terry Fritz <twftesla-at-uswest-dot-net>" <yubba-at-clara-dot-net>

Some pics of my new rotary are at hot streamer. Photos, (and rotor
machining) thanks to Jonathan. Design thanks to Ian Jackson. Thanks
guys. The motor came out of an old centrifuge. 300 watts 5500 RPM.
Electrodes 4.8 mm TIG electrodes. Rotor 1/2" G10 12" diameter. Electrode
holders Bulkhead connectors from the local hydraulics shop.

http://hot-streamer-dot-com/temp/bob%20g's%20rotary%201.jpg
http://hot-streamer-dot-com/temp/bob%20g's%20rotary%202.jpg

cheers
bob golding

Prev by Date: mmc calculator
Next by Date: Was: Grid R/C VTTC Now: DC Staccato
Prev by thread: Re: mmc calculator
Next by thread: Was: Grid R/C VTTC Now: DC Staccato
Index(es):
- Date
- Thread