Re: Protection circuit

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Terry Fritz" <twftesla-at-uswest-dot-net>

Hi Tim,

At 04:54 AM 2/27/2001 -0700, you wrote:
>Hi All, I have two NST's which are 15/30's at 450VA. I want to hook them
>in series to get 15/60 to produce 900 VA. I have the schematic diagram
>of Terry Fritz which details the materials and design of a protection
>circuit for a 15/30 NST setup but I am wanting to know if I need more
>protection for a 15/60 setup. Each NST is rated at 30MA. Terry's
>schematic says that it is good at up to 240MA. Is this enough protection
>for my setup?
>Thanks to all for your help. Later, Tim

It should work fine as is.  I also have a protection circuit on my 15/60
coil which is a bit more optimized for 15/60 but either will work fine.

http://hot-streamer-dot-com/TeslaCoils/MyCoils/BigCoil/BigCoil.htm

Cheers,

	Terry Fritz