pig in overdrive...

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "BunnyKiller by way of Terry Fritz <twftesla-at-uswest-dot-net>" <bigfoo39-at-telocity-dot-com>

Hi All...

been kicking around an idea of supplying about 300-325V to a 10KVA piggie (
14.4KV/240V type)

at 14.4KV the peak to peak is about 20KV  and at 300V in we should see
about 25KV peak to peak
on the output side...   do yall think the insulation on the hi volt side is
good for 25KV????

at present i have run the voltage up to 280V in  via variac with no
noticable side effects (
other than longer streamers ;)  )

also ..  has anyone here paralleled the output side of 2 10KVA piggies??  (
for a 20KVA setup)

thinkin again...


Scot D