RE: 5kva pig power controller

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Loudner, Godfrey by way of Terry Fritz <twftesla-at-uswest-dot-net>" <gloudner-at-SINTE.EDU>

For your 5kva pole pig, its 240 in and 14400 out. The 24940 is for a wye
connection between three identical 5kva pole pigs. You cannot get 24940 out
from your pole pig. For a little math. involved, 24940 = 14400X(the square
root of 3). 

Godfrey Loudner

> -----Original Message-----
> From:	Tesla list [SMTP:tesla-at-pupman-dot-com]
> Sent:	Friday, March 30, 2001 1:08 PM
> To:	tesla-at-pupman-dot-com
> Subject:	5kva pig power controller
> 
> Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>"
> <Gbjsjg-at-aol-dot-com>
> 
> Got my pig, it's great! 120/240 inn, 14400/24940 out. Started power
> cabinet 
> got some questions!! If you have a power controller. I have a few
> questions, 
> if you would be nice enough to help me out with them.
>     -What kind of switches did you use on your power cabinet?
>     -What kind of lights?
>     -Do you have a key switch?
>     -If so, where did you get it?
>     -Do you have 1256d transformer?
>     -If so, how much did it cost for your 1256d autotransformers?
>     -If so, where did you get them?
>     -Do you use a balancing choke?
>     -If so, what kind?
>     -Have you built your own balancing choke?
>     -How would one go about designing it?
>     -What is the best kind of balancing choke?
>     -Any tips in building a power cabinet would be appreciated.
>         Sorry for all the questions I am building my first power
> controller. 
>                                                             Thanks
>                                                                     -Max 
> Joseph
> 
>