RE: breakout ring

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Duke, Ronn (CCI-San Diego CCC) by way of Terry Fritz <twftesla-at-uswest-dot-net>" <Ron.Duke-at-cox-dot-com>

Will,
John Freau might still have some 6" spun aluminum toriods that work very
nicely as corona rings. Check his web site for details.
http://members.aol-dot-com/FutureT/index.html
<http://members.aol-dot-com/FutureT/index.html>  


	-----Original Message-----
	From:	Tesla list [SMTP:tesla-at-pupman-dot-com]
	Sent:	Wednesday, March 28, 2001 3:59 PM
	To:	tesla-at-pupman-dot-com
	Subject:	breakout ring

	Original poster: "will dork by way of Terry Fritz
<twftesla-at-uswest-dot-net>" <vcdmasta-at-hotmail-dot-com>

	Where can you get a breakout ring, and how big should it be? i am
going to 
	be using it on a coil with the following specs:

	secondary:
	30 by 6.75
	22 heacy build magnet  wire

	primary
	17 turns .25 dia copper tubing
	spacing between each turn .5 or turn to turn spacing is 1

	cap:
	21 nf 40kv cap

	2 15kv 60 ma nsts

	topload:
	???

	I hope i provide enough info,
	thanks
	will mcmanus


	_________________________________________________________________
	Get your FREE download of MSN Explorer at http://explorer.msn-dot-com