Re: Ganging 1256D's

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "BunnyKiller by way of Terry Fritz <twftesla-at-uswest-dot-net>" <bigfoo39-at-telocity-dot-com>

Tesla list wrote:

> Original poster: "D.Wightman by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<dwightman-at-mmcable-dot-com>
>
> Ok, since were on the subject of ganging 1256-D powerstats I too have a
> question. I have a stack of 4, 1256-D powerstats, and also have 2 of the
> paralleling chokes from superior electric. Since 1 choke is good for 2
> variacs, and i will be using a stack of 4 variacs total, and have only 2
> chokes. Then would it be fair to say that I should get a third choke to put
> between the 2 pairs of powerstats that are already ganged in parallel with
> paralleling chokes?

Snipperzzz...

yes you will need another choke to balance out the voltage "differences"
between the 2 sets of
variacs.

Scot D