[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: building primaries

To: tesla-at-pupman-dot-com
Subject: RE: building primaries
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 27 Jun 2001 19:12:56 -0600
Resent-Date: Wed, 27 Jun 2001 19:13:03 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <6XBwRB.A.SNC.aSoO7-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Pete Komen by way of Terry Fritz <twftesla-at-qwest-dot-net>" <pkomen-at-zianet-dot-com>

It is possible to drill the holes (use a fence on a drill press for
uniformity), then on a table saw, cut through the row of holes so that the
tubing snaps into what's left.  Putting the tubing on was easy!  I used
Plexiglas for the supports but other things would work.  No glue, no ties,
no threading.
Pete Komen

Prev by Date: RE: Coil Frustration - Clarify
Next by Date: Re: Working with Plexiglas
Prev by thread: Re: building primaries
Next by thread: Re: building primaries
Index(es):
- Date
- Thread