[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Flyback Xfmr - Thanks



Original poster: "Jason Petrou by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jasonp-at-btinternet-dot-com>

Godfrey

Sorry, habit. I suppose its not strictly an RF burn - its only running at i
suppose 16KHz, not really enough. Most likely it was from the plasma, which
does burn... I call it a mixture of the two.

Jason
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, June 25, 2001 6:37 PM
Subject: RE: Flyback Xfmr - Thanks


> Original poster: "Loudner, Godfrey by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <gloudner-at-SINTE.EDU>
>
> Hi Jason
>
> I've heard of RF burn, but I thought that you could only get a burned from
> high powered electronics such has huge vacuum tubes. Are dangers of RF
burn
> from tesla coils?
>
> Godfrey Loudner
>
> > -----Original Message-----
> > From: Tesla list [SMTP:tesla-at-pupman-dot-com]
> > Sent: Monday, June 25, 2001 9:05 AM
> > To: tesla-at-pupman-dot-com
> > Subject: Re: Flyback Xfmr - Thanks
> >
> > Original poster: "Jason Petrou by way of Terry Fritz
<twftesla-at-qwest-dot-net>"
> > <jasonp-at-btinternet-dot-com>
> >
> > Hi all,
> >
> > Thanks for all the feeedback on my flyback. Pulsing a 10J cap thru the
> > primary winding, i successfuly gave myself a nasty RF burn, so I think
it
> > works! When I get it connected up to a sig. gen and a FET the I will
post
> > the details on my website.
> >
> > Happy coiling
> > Jason
> > ----- Original Message -----
> > From: "Tesla list" <tesla-at-pupman-dot-com>
> > To: <tesla-at-pupman-dot-com>
> > Sent: Monday, June 25, 2001 8:48 AM
> > Subject: Re: Flyback Xfmr
> >
> >
> > > Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> > <Pyrotrons-at-aol-dot-com>
> > >
> > > Hi All.
> > >
> > > I have some information about flybacks and driver circuitry on a
> > webpage,
> > but
> > > it is incomplete.
> > >
> > > There is still some useful info (watch the diodes!) on there, so:
> > >
> > > http://www.angelfire-dot-com/tx4/ionwind/flyback.html
> > >
> > > Please forgive the ad's.
> > >
> > > Take care, hope you get something out of it,
> > >
> > > Justin Hays
> > > KC5PNP
> > > Email: pyrotrons-at-aol-dot-com
> > > Webpage: www.hvguy-dot-com
> > >
> > >
> > >
> >
> >
>
>
>