RE: JavaTC's original Excel File

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Vanderputten, Gary by way of Terry Fritz <twftesla-at-qwest-dot-net>" <gvp-at-pvaintl-dot-com>

Thank you, Bart!

Really thorough, and just at the right time for me. I recognize many of the
pieces, but it is really helpful to see it all in one place.

Gary

 -----Original Message-----
From: 	Tesla list [mailto:tesla-at-pupman-dot-com] 
Sent:	Friday, June 15, 2001 9:57 AM
To:	tesla-at-pupman-dot-com
Subject:	JavaTC's original Excel File

Original poster: "Barton B. Anderson by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <tesla123-at-pacbell-dot-net>

Hi All,

Thought I'd throw another Excel file at you. The following file is in
Excel format and is the Excel file I've been using for the past few
years. I've never thrown it out to the list before. It began as Ed
Sonderman's spreadsheet and just developed over time. I eventually
developed JavaTC to mimic this file. Feel free to add, delete, hack it
up, or whatever you want. I know some users like to use Excel (as I do)
and thought I should let give it to the list. It's in my temp directory
at my website:

 www.classictesla-dot-com/temp/batc5.zip

It has a Secondary, Primary, Top Load, Power, Spark Gap, and Final
Design sheets. It also includes my wire table for round copper magnet
wire and a sheet I was using to aid ACMI and MandK testing.

Take care,
Bart Anderson

ps: Becuase I'm building a smaller 8" coil at the moment, the input
cells show those values.