Re: Toroid

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Luc by way of Terry Fritz <twftesla-at-qwest-dot-net>" <ludev-at-videotron.ca>

Hi Brian

Tx for shearing the photo with us, may be you could try AL duck
tape in place of the electric tape. Ingenious...;-)

Cheers,

Luc Benard  

Tesla list wrote:
> 
> Original poster: "brian by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<ka1bbg1-at-mcttelecom-dot-com>
> 
> hi. one picture is at:
> 
> http://hot-streamer/temp/tesla38.jpg
> 
> ....shortly i will upload
> some more pictures. cul brian f.
> 
> http://hot-streamer/temp/tesla31.jpg
> to...
> http://hot-streamer/temp/tesla41.jpg
> 
> ----- Original Message -----
> From: "Tesla list" <tesla-at-pupman-dot-com>
> To: <tesla-at-pupman-dot-com>
> Sent: Wednesday, June 06, 2001 1:04 PM
> Subject: Re: Toroid
> 
> > Original poster: "Luc by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <ludev-at-videotron.ca>
> >
> > Hi Brian
> >
> > Could you post a photo of it somewhere ( the fan shroud alone or
> > mounted on a coil )
> >
> > Cheers,
> >
> > Luc Benard
> >
> > Tesla list wrote:
> > >
> > > Original poster: "brian by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> > <ka1bbg1-at-mcttelecom-dot-com>
> > >
> > > Hi, i use a fan schroud for a second large toroid. the only problem i
> have
> > > is it is taped together with electrical tape and once in a while ill get
> a
> > > burn spot and then it acts like breakout point. the indentation on one
> > > side(clearance space for the motor) doesnt seem to affect operation. I
> have
> > > dryer duct but havent made a toroid with it yet. but i suspect it wont
> make
> > > much difference. i have looked at a lotta tesla sites and see toroids
> made
> > > of dryer duct all the time. sure a nice alum spun toroid is probably
> best
> > > but nothing beats a toroid made for 10 bucks that works! cul brian
> > >
> > > ----- Original Message -----
> > > From: "Tesla list" <tesla-at-pupman-dot-com>
> > > To: <tesla-at-pupman-dot-com>
> > > Sent: Tuesday, June 05, 2001 10:53 PM
> > > Subject: Toroid
> > >
> > > > Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> > > <Gbjsjg-at-aol-dot-com>
> > > >
> > > > How does the wire toroid compair to the aluminum drain pipe toroid?
> > >
>   -M
> > > ax
> > > > Joseph
> > > >
> > > >
> > > >
> > > >
> >
> >
> >
> >