[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Question:



Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Gene,

It Allanson is a very popular NST brand.  It is perfect.  Each side is 7500
volts with the center of the secondary winding connected to the case
(ground) which is they way all NSTs like this are.  The two sides are 180
degrees out of phase so there is 15000 volts between them.  Basically, one
side is at +7500 volts above ground at the same time the other side is
-7500 volts below ground.

Cheers,

	Terry


At 09:59 AM 6/6/2001 -0700, you wrote:
>I am collecting parts for a future Tesla coil project. I bought a NST that
>I've never seen mentioned before, and am wondering what the list thinks of
>it.
>
>it is a:
>
>Allanson
>
>15kv-at-60ma
>
>The spec I'm not sure about is this:
>
>The secondary is "midtap grounded."
>
>What does that mean?
>
>Regards,
>
>Gene lambert
>
>
>