Re:Re: spun toroids

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Yurtle Turtle by way of Terry Fritz <twftesla-at-qwest-dot-net>" <yurtle_t-at-yahoo-dot-com>

I'd be interested. I'm about to outgrow my 6" x 24"
Landergren toroid.

Adam

--- Tesla list <tesla-at-pupman-dot-com> wrote:
> Original poster: "by way of Terry Fritz
> <twftesla-at-qwest-dot-net>" <Tesla729-at-cs-dot-com>
> 
> In a message dated 5/30/01 9:47:40 PM Central
> Daylight Time, tesla-at-pupman-dot-com 
> writes: 
> 
> 
> >
> > Try here.  I did a bulk toroid buy a while back. 
> > The quality is EXCELLENT. 
> > Be prepared to spend $$$ for short runs though. 
> The price gets very 
> > reasonable for quantities. 
> > We did 50 pieces for the bulk buy. 
> >
> > Make sure you get the 6061 aluminum, the 1100 is
> softer and tends to 
> > dent more easily. 
> > Also ask for extra packaging material, especially
> overseas, as some had 
> > to be replaced due to 
> > dents in shipping. 
> >
> >
> > Mark R. Pratt, V.P. 
> > > > Phone 413/445-5632 
> > > > Fax 413/499-0614 
> > > > EMAIL owlspin-at-vgernet-dot-net 
> > > > WEB www.owlandergren-dot-com 
> > > > Thank You 
> > > > 
msnip...